English
中文
English
bahasa malaysia
عربي
VietNamAluminum based intermediate alloy
Ingot Mold Coating AT170
Product application instructions: Pre-use treatment:
Shake well and dilute with diesel or kerosene (recommended dilution ratio ≤1).
Painting method:
Spraying: nozzle diameter 1.3-1.5mm, pressure 0.3-0.4MPa;
Brush coating: evenly cover the mold surface with a film thickness of 50-80μm.
Drying: Bake at 150℃ to evaporate the oil.
| Product Series | Product name | Product Code | Remark |
|
High temperature coating category
|
boron nitride | BN | Surface lining and metal parts in contact with aluminum liquid |
| Casting coating | AT140 | Suitable for gravity casting of piston castings and wheel hubs, etc | |
| Casting coating | AT390 | Suitable for situations where a smooth casting surface is required | |
| Casting coating | AT120 | Suitable for occasions requiring good insulation performance | |
| Flow channel coating | AT110 | Protective coating suitable for chutes, diversion plates, tools, crucibles, etc | |
| fire clay | AX1150 | Used for pasting or repairing channels, funnels, and linings | |
| coating mixture | AT170 | Suitable for demolding aluminum and aluminum alloy ingots | |
| Mold repair agent | AX-1160 | Suitable for pasting or repairing the inner wall of graphite rings in aluminum alloy bar crystallizers |
Copy product links
Long by picture save/share
Suzhou Foto New Material Technology
Tele：13382209786
E-mail： weiyongfeng@126.com
ADD：No. 107 Shanzheng Road, Shanzheng Industrial Park, Jingang Street, Zhangjiagang City, Suzhou City, Jiangsu Province
Contact Us
Tele：13382209786
E-mail： weiyongfeng@126.com
weiyongfeng@fotonm.com
Add：No. 107 Shanzheng Road, Shanzheng Industrial Park, Jingang Street, Zhangjiagang City, Suzhou City, Jiangsu Province
Copyright © 2005-2015 MySite Ltd. All Rights Reserved.
English
عربي
bahasa malaysia
VietNam
中文
