1. Product characteristics

Aluminum-bismuth alloy master alloy (product code AlBi, the name 'aluminum-hafnium alloy' in the picture may be a typo, and here it is written as AlBi aluminum-bismuth alloy). The bismuth content can be customized. Bismuth element can improve the cutting performance of aluminum alloy, but it will reduce the plasticity.

II. Applicable Scenarios

Suitable for the production of easy-to-cut aluminum alloys, such as aluminum rods for automatic lathes, precision machined parts, etc.

III. Dosage

The recommended addition amount is 0.5% to 3% of the mass of the aluminum liquid, calculated based on the target bismuth content.

IV. Usage

1. The temperature of the aluminum liquid is 720℃～750℃.

2. After removing the slag, put the aluminum-bismuth alloy block into the melt and stir until it dissolves.

3. Dissolution time: 5-10 minutes.

4. Allow it to stand and remove the slag before casting.

V. Precautions

Bismuth is prone to volatilization, so it should not be kept at high temperatures for extended periods; it should be stored in a dry environment.

VI. Packaging Specifications

0.2-7kg per piece (strip), 20kg-1000kg per unit

VII. Storage conditions

Store in a ventilated and dry place, and strictly prevent moisture.

8. Shelf life

12 months

IX. Production unit

Suzhou Futuo New Material Technology Co., Ltd