1. Product characteristics

AD1-3 Low-temperature slagging agent is specifically designed for aluminum melts at lower temperatures, and it can still effectively wet and separate dross within the range of 600℃ to 680℃. This makes the slag layer loose and easy to scrape, reducing metal entrainment and improving recovery rates.

II. Applicable Scenarios

Suitable for slagging of aluminum alloys that require low-temperature melting processes or strict temperature control, such as partially deformed aluminum alloys, aluminum-silicon alloys, aluminum matrix composites, etc.

III. Dosage

0.1% to 0.2% of the mass of aluminum liquid, with a typical value of 0.15%.

IV. Usage

When the temperature of the aluminum liquid is between 600℃ and 680℃, evenly sprinkle the slagging agent on the slag surface. Gently stir for 1 to 2 minutes, and remove the slag after it dries. This operation can be repeated.

V. Precautions

Avoid using it at high temperatures (>700℃ as its effectiveness may decrease); take protective measures during operation.

VI. Packaging specifications

2 kg/bag, 20 kg/box

VII. Storage conditions

Store in a well-ventilated and dry place, and strictly prevent moisture.

8. Shelf life

12 months

IX. Production unit

Suzhou Futuo New Material Technology Co., Ltd

This instruction serves as a general usage guide. Specific process parameters should be adjusted based on the actual on-site conditions. The final interpretation of this document belongs to Suzhou Futuo New Material Technology Co., Ltd.